Specifications; Functional Description; Sander Safety Warnings - Makita BO6030J Instruction Manual

ENGLISH
(Original instructions)
1 Lock button
2 Switch trigger
3 Speed adjusting dial
4 Notches
5 Front grip
6 Hole in front grip
7 Screwdriver
8 Abrasive disc
9 Hex wrench

SPECIFICATIONS

Model
Pad diameter ...................................................... 150 mm
Abrasive disc diameter ....................................... 150 mm
–1
Orbits per minute (min
Sanding stroke rate (min
Overall length ..................................................... 309 mm
Net weight .............................................................. 2.4 kg
Safety class ................................................................ /II
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for the sanding of large surface of
wood, plastics and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.

SANDER SAFETY WARNINGS

1. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
2. Hold the tool firmly.
3. Do not leave the tool running. Operate the tool
only when hand-held.
4. This tool has not been waterproofed, so do not
use water on the workpiece surface.
Explanation of general view
10 Screw
11 Pad
12 Dust nozzle
13 Dust bag
14 Push button
15 Hook
16 Groove
17 Front fixing cardboard
18 Front side of paper dust bag
) ......................... 4,000 – 10,000
–1
) ...................... 8,000 – 20,000
5. Ventilate your work area adequately when you
perform sanding operations.
BO6030
6. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
7. Use of this tool to sand some products, paints
and wood could expose user to dust containing
hazardous substances. Use appropriate respira-
tory protection.
8. Be sure that there are no cracks or breakage on
the pad before use. Cracks or breakage may
cause a personal injury.
SAVE THESE INSTRUCTIONS.
WARNING:
ENE052-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
ENF002-2

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
GEA010-2
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
"OFF" position when released.
To start the tool, simply pull the switch trigger.
Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
GEB021-4
19 Claws
20 Upper part
21 Notch
22 Guide
23 Sponge pad
24 Felt pad
25 Wool pad
5