Page 1
Assembly should be by an adult only. For quicker assembly, we recommend the The parts of the Kids Barnhouse in their unassembled state contain use of a power drill on a low-speed setting. potentially hazardous small parts and sharp points.
Page 2
Insert 14 x dowels (B) into panels [6], [5], [2], [3] and [7] as shown. Attach panels [6] and [5] to panel [7] and secure with 2 x screws (A). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 3
Attach panel [2] to panel [5] and secure with 4 x screws (A). Tighten Attach panel [3] to panel [5] and secure with 4 x screws (A). Tighten with a screwdriver. with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 4
Attach panel [4] to panel [2] and secure with 6 x screws (A). Tighten Attach panel [1] to assembled frame and secure with 4 x screws (A). with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 5
Assembly Instructions 8 x3 Once assembled lift furniture into place, do not drag. Place panel [8] into position as shown, turn feet for balance as shown. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Kids Barnhouse and is the answer not in the manual?
Questions and answers