Mocka Kids Steel Wagon Assembly Instructions

Enlarged version

Kids Steel Wagon

Thank you for your purchase.

Please follow the instructions below for correct assembly.

nut

short screw

x11

medium

round ball

screw

Phillips screwdriver

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

For added safety make regular checks to ensure all

screws and nuts are tight and secure.

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

washer

end cap

long screw

circular swivel

spanner

support

brace

Warning: Small parts are used to assemble the Kids Steel Wagon

and should only be assembled by an adult. Keep all assembly parts away

from small children.

Suitable for ages 12 months +

Table of Contents

Need help?

Do you have a question about the Kids Steel Wagon and is the answer not in the manual?

Page 1: Assembly Instructions
Hardware Supplied Phillips screwdriver Warning: Small parts are used to assemble the Kids Steel Wagon For quicker assembly, we recommend the use of a power drill on a low-speed setting. and should only be assembled by an adult. Keep all assembly parts away from small children.
Page 2 Hold screws in place with the axle and round ball, and fastening with nut (B). Tighten nut with screwdriver and tighten nuts (B) with spanner (I). spanner (I). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 3 Attach rear axle to the wagon tray using two medium screws using 5x small screws (A) and nuts (B). Tighten from underneath using (G) and 2x nuts (B) and tighten from underneath using the spanner (I). the spanner (I). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Page 4 Secure end caps (E) by tapping with a hammer to ensure correct fitting. slide on all four wheels before pressing on the end caps (E). Securely tighten all nuts (B) before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...