Table of Contents
Advertisement
Do not use within the first 15 minutes after installation!
Use only the supplied mounting hardware
Tighten Screws to 4.5 Nm
Ensure the mounting surface does not warp after assembly and reinforce it if necessary
The bracket helps with the mounting of the cooling unit during installation
1
Screws
2
Toothed washers
3
Flat washers
4
Enclosure
5
Cooling unit
6
Mounting bracket
Version No. 1-5 - 26.01.2022
8. Mounting Principle
Doc. No. 9957082182SG
9 / 17
Advertisement
Table of Contents
