Table of Contents
Advertisement
2. Setting up the monitor
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
2560 × 1440 @ 60 Hz. When the monitor
is powered on at a different resolution,
an alert is displayed on screen: Use
2560 × 1440 @ 60 Hz for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
Tilt
20˚
Height adjustment
-5˚
130mm
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
Display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.
2. While keeping the release button
pressed, tilt the base and slide it
out.
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
100mm
8
100mm
1.4
Advertisement
Table of Contents
