DC power cord for normal operation. notes regarding the operation of your monitor. • Please use approved power cord provided by Philips at all times. If The Philips guarantee applies provided your power cord is missing, please the product is handled properly for contact your local service center.
Page 4
1. Important • If foreign substance or water gets in repaired. The damage mentioned above your monitor, please turn the power is not covered under your warranty. off immediately and disconnect Service the power cord. Then, remove the foreign substance or water, and • The casing cover should be opened send it to the maintenance center.
1. Important 1.2 Notational Descriptions 1.3 Disposal of product and packing material The following subsections describe notational conventions used in this Waste Electrical and Electronic document. Equipment-WEEE Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type.
Page 6
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- back initiatives and recycling programs whenever possible, preferably in...
Top Victory Investments Ltd. or one of its a liates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.
2. Setting up the monitor Connecting to your computer 2.2 Operating the monitor Description of the control buttons AC/DC power input Earphone jack Audio input VGA input Press more than 3 seconds to switch display power Display port 1(Support 1.4) input OFF.
Page 9
White, Red,Rose,Magenta,Violet, Blue,Azure,Cyan,Aquamarine,Green, On-Screen Display (OSD) is a feature in Chartreuse,Yellow,Orange 1, 2, 3,4 LowBlue all Philips LCD monitors. It allows an end Mode user to adjust screen performance or Input HDMI 1.4 select functions of the monitors directly HDMI 2.0...
2. Setting up the monitor Resolution notification 2.3 Remove the Base Assembly This monitor is designed for optimal for VESA Mounting performance at its native resolution, Before you start disassembling the 2560 × 1440 @ 60 Hz. When the monitor Display base, please follow the is powered on at a different resolution, instructions below to avoid any possible...
There are 7 modes to select: FPS, in real time. Whether you're working Racing, RTS, Gamer1, Gamer2, LowBlue with text applications, displaying images Mode and Off. or watching a video, Philips SmartImage delivers great optimized monitor SmartImage GAME performance. Why do I need it?
Unique technology that dynamically time. Developed for wellbeing, analyzes displayed content and Philips LowBlue Mode setting uses a automatically optimizes a Monitor's smart software technology to reduce contrast ratio for maximum visual clarity harmful shortwave blue light.
Ambiglow adds a new dimension to your viewing experience. This patented Philips technology uses two rows of bright LED’s projecting a glow of light on the bottom of the display. The innovative Ambiglow processor continuously adjusts the overall color ...
6. HDR 6. HDR HDR Settings in Windows10 system. Steps 1. Right click on the desk top, enter to Display settings. STEP 5 2. Select the display/monitor. 3. Adjust resolution to 2560 x 1440 4. Turn the “HDR and WCG” to on mode.
7. Technical Specifications 7. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size 31.5" W (80 cm) Aspect Ratio 16:9 Pixel Pitch 0.272 x 0.272 mm SmartContrast 50,000,000:1 Response Time (typ.) 22 ms(GtG) SmartResponse 4 ms (GtG) Optimum Resolution 2560x1440 @ 144Hz Viewing Angle 178°...
Page 17
7. Technical Specifications AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC, 50Hz Normal Operation 60.90 W (typ.) 61.00 W (typ.) 61.10 W (typ.) Sleep (Standby) <0.5 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.3 W (typ.)
Page 18
CE Mark, FCC Class B, CU-EAC, RCM, CCC, KCC, E-standby Cabinet Color Black Finish Glossy Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. Smart response time is the optimum value from either GtG or GtG (BW) tests.
7. Technical Specifications Note 7.1 Resolution & Preset Modes • Please notice that your display Maximum Resolution works best at native resolution 2560x1440@144Hz (HDMI 2.0/DP 1.4) of 2560 x 1440@ 60Hz. For best 2560x1440@75Hz (HDMI 1.4) display quality, please follow this 1920x1080@60Hz (VGA) resolution recommendation.
8. Power Management 8. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
9.1 Philips’ Flat Panel Monitors single black pixel. Other combinations Pixel Defect Policy of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the Types of Pixel Defects...
Page 22
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 23
9. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Disconnect the monitor from mains This page deals with problems that can power source immediately for safety be corrected by a user. If the problem • Contact with Philips customer still persists after you have tried these service representative immediately. solutions, contact Philips customer service representative.
• Shut down your computer, resolution. disconnect your old monitor and reconnect your Philips monitor. Green, red, blue, dark, and white dots • Turn on your monitor and then turn appears on the screen on your PC.
Page 27
Can I connect my monitor to any Ans.: For normal cleaning, use a clean, PC, workstation or Mac? soft cloth. For extensive cleaning, Ans.: Yes. All Philips monitors are fully please use isopropyl alcohol. Do compatible with standard PCs, not use other solvents such as Macs and workstations.
Page 28
10. Troubleshooting & FAQs or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
Page 29
Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.