Outdoor Essentials Vertical Garden Planter Assembly Instructions

Parts included

A - (3) Shelf bottoms with grooves (1-1/4" x 6" x 34-1/2")
B - (3) Shelf backs (1-1/4" x 6" x 34-1/2")
C - (3) Moulded shelf faces (5/8" x 5-3/8" x 34-1/2")
D - (1) Left side support (2" x 9-1/8" x 36")
E - (1) Right side support (2" x 9-1/8" x 36")
F - (2) Planter feet (1-3/8" x 3-3/8" x 15-3/4")
G - (8) Phillips-head screws

tools included

5/32" Allen wrench
Phillips-head bit
assembly instructions
1. Place left side support (D) and right side support (E) on edge
with flat edge facing up, and routed sides facing inward. (Fig. 1)
2. Slide shelf bottoms (A) into routed slots in the side supports,
small groove toward front. (Fig. 2)
3. Slide the shelf backs (B) into the routed slots in the side
supports, perpendicular to the shelf bottoms. (Fig. 3)
a. Installation tip: Place the bottom of the shelf back in the
large groove in the shelf bottom, then press the rest of the
back into the opening to create a solid backing to the shelf.
The shelf backs are a snug fit and may require some force
to fit securely.
Vertical Garden Planter assembly instructions
Fig. 1
Fig. 2
a
Fig. 3
b
a
d
e
d
e