Outdoor Essentials 2X2 RAISED GARDEN BED KIT Installation Instructions

2x2 and 3x3 Kit
Parts included
(4) Preassembled side assemblies
(8) Phillips head screws
Tools required
Cordless drill with Phillips bit
1
Place two sides together to make a corner
(metal plates facing inward).
Drive screws into predrilled holes to connect the two sides.
2
Repeat with remaining sides to complete the bed.
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION
OR USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH
THE CONSTRUCTION OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE
PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES
NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
©2017 Universal Forest Products, Inc. Outdoor Essentials is a registered trademark of Universal Forest Products. All rights reserved.
3x3RaisedGard.ai
2X2, 3X3 AND 3X6 RAISED GARDEN BED KIT
INSTALLATION INSTRUCTIONS
2801 East Beltline NE, Grand Rapids, MI 49525 1-800-598-WOOD
OutdoorEssentialProducts.com
Parts included
(2) Preassembled 72" side assemblies
(2) Preassembled 48" side assemblies
(12) Phillips head screws
Tools required
Cordless drill with Phillips bit
1
Place two sides together to make a corner
(metal plates facing inward).
Drive screws into predrilled holes to connect the two sides.
2
Repeat with remaining sides to complete the bed.
9256_2/17
3x6 Kit
3x6RaisedGard.ai
fig. 2