Assemble one "A1/B1" leg and one "A2/B2" leg by fastening
together through the predrilled holes (fig. 1).
Note: Do not assemble all four legs. Two legs will need to
remain unassembled for later steps.
©2016 Universal Forest Products, Inc. Outdoor Essentials is a registered trademark of Universal Forest Products, Inc. All rights reserved.
STEP 1
A1
B1
B2
A2
68956 U.S. Hwy 131, White Pigeon, MI 49099 616.365.4201 8902_7/16
www.outdooressentialproducts.com
ELEVATED GARDEN PLANTER
INSTALLATION INSTRUCTIONS
•
• 2 – 32 in. "A1"
leg components
• 2 – 32 in. "A2"
leg components
• 2 – 32 in. "B1"
leg components
• 2 – 32 in. "B2"
leg components
• Drill
• #2 Phillips drill bit
Attach one leg on each side assembly (fig. 2).
A1
B1
B2
A2
fig. 1
Kit contents
• 2 – 10-1/2 in. x 46-1/4 in.
side assemblies
• 2 – 10-1/2 in. x 20-3/4 in.
end assemblies
• 1 – 22-1/2 in. x 46-1/2 in.
bottom tray
• 4 – 1x4 bottom supports
• 40 – Screws
Tools needed
STEP 2
Side Assembly
•
•
Ledger
Ledger
•
•
Side Assembly
fig. 2
Need help?
Do you have a question about the ELEVATED GARDEN PLANTER and is the answer not in the manual?
Questions and answers