Operation Instructions - Respekta MW 800 Operating And Installation Manual

Operation Instructions

1. Clock Setting
When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
1) Press "
Clock/ Kitchen Timer
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press "
Clock/ Kitchen Timer
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press "
Clock/ Kitchen Timer
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press "
will go back to the previous status automatically.
2. Microwave Cooking
Press "
Micro./Grill/Combi.
"
Micro./Grill/Combi.
"P100", "P80" "P50", "P30
"
Start/+30Sec./Confirm
95:00. Press "
Start/+30Sec./Confirm
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
Micro./Grill/Combi.
1) Press "
Micro./Grill/Combi.
2) Press "
power.
3) Press "
Start/+30Sec./Confirm
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press "
Start/+30Sec./Confirm
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
" once to select clock function, the hour figures will flash.
", the minute figures will flash.
" to finish clock setting. ":" will flash, and the time will light.
" once, the screen will display "P100 .Press
"repeatedly or turn "
" or "P10" will display for each added press. Then press
" to confirm, and turn "
" again to start cooking.
" once, the screen displays "P100".
" once again or turn"
" to confirm, and the screen displays "P 80".
" to start cooking .
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
"to choose the power you want, and
" to set cooking time from 0:05 to
" to choose 80% microwave
17
", the oven
Stop/Clear