Programming - Escort C65 Owner's Manual

Programming

There are 7 user-selectable options so you
can customize your C65 for your own
preferences. The buttons labeled CITY and
BRT are also used to enter the Program
Mode, REVIEW your current program
settings, and to CHANGE any settings as
desired. The words PROGRAM, RVW, and
CHG are located on the top of the detector,
and are highlighted in colored graphics.
Pages 14-16 explain each option in more
detail.
How to use Programming
1
To enter Program Mode, press and
hold the CITY and BRT buttons for 2
seconds. The unit will beep twice, and
Program
will display the word .
2
Then press the RVW button to
review the current settings. You can
either tap the button to change from item
to item, or hold the button to scroll
through the items.
3
Press the CHG button to change
any setting. You can either tap the button
to change from setting to setting, or hold
the button to scroll through all the
options.
4
To leave the Program Mode,
simply wait 8 seconds without
pressing any button. The unit will
Complete
display , beep 4 times, and
return to normal operation.
An example
Here is how you would turn C65's
AutoMute feature off.
1 Enter the Program Mode by holding
both the CITY and BRT buttons down for
2 seconds. The C65 will beep twice and
Program
display .
2 Then hold the RVW button down. The
C65 will scroll through the categories,
Pilot
starting with Pilot ( ), then Voice
Voice
( ), then Power-on sequence
PwrOn
( ), then Signal strength meter
Meter aMute
( ), and then AutoMute (
3 Release the RVW button when C65
shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
aMute ON
C65 will display .
If you accidentally don't release the
RVW button in time, and the C65 goes to
the next category, hold the RVW button
down again, and after C65 scrolls
through all categories, it will begin again
at the top of the list.
4 Press the CHG button to change from
aMute ON aMute OFF
to .
5 To complete the Programming, simply
wait 8 seconds without pressing any
Complete
button. The C65 will display
beep 4 times, and return to normal
operation.
12
Overview of Programming
Press the REVIEW button
to go from one category
(Power-on indication)
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
).
AUTOMUTE
CITY MODE SENSITIVITY
*
Factory Default Settings
To reset C65 to its original factory
settings,press and hold the"CITY"
and"BRT"buttons while turning
the power on. The C65's display
Reset
will provide a
,
accompanied by an audible alert,
acknowledging the reset.
Press the CHANGE button
to change your setting
to the next within a category
PILOT * Full word:Highway or AutoScan or City
Pilot HWY
Letter:H or A or C
Pilot H
Vehicle voltage
Pilot V
VOICE * Voice alerts on
Voice ON
Voice alerts off
Voice OFF
* Standard power-on sequence
PwrOn STD
Fast power-on sequence
PwrOn FST
* Standard signal strength meter
Meter STD
Threat Display
Meter THT
Tech Display
Meter TEC
* AutoMute on
aMute ON
AutoMute off
aMute OFF
* Standard City mode sensitivity
City STD
Low X band sensitivity in City Mode
City LoX
No X band sensitivity in City Mode
City NoX
BANDS * All bands enabled
Bands ALL
One or more bands are disabled
Bands MOD
Turn bands"ON"or"OFF"by
pressing the VOLUME/MUTE button
X ON OFF
or
K ON OFF
or
Ka USA Int
or
POP ON OFF
or
Ku ON OFF
message,
or
LSR ON OFF
or
SWS ON OFF
or
13
OFF
or