Tools For Installation; Selection Of Installation Location - Lennox LI009CO-160T432 Owner's Manual

Hide thumbs Also See for LI009CO-160T432:
Table of Contents

Advertisement

Tools for installation

1 Level meter
4 Drill head
7 Open-end wrench
10 Vacuum pump
13 Inner hexagon spanner
Note:
● Please contact the local agent for installation.
● Don't use unqualified power cord.

Selection of installation location

Basic requirement
Installing the unit in the following pla-
ces maycause malfunction. If it is un-
avoidable, please consult the local
dealer:
1.The place with strong heat sources,
vapors, flammable or explosive gas,
or volatile objects spread in the air.
2.The place with high-frequency
devices (such as welding machine,
medical equipment).
3.The place near coast area.
4.The place with oil or fumes in the air.
5.The place with sulfureted gas.
6.Other places with special circums-
tances.
7.Do not use the unit in the immediate
surroundings of a laundry a bath a
shower or a swimming pool.
Outdoor unit
1. Select a location where the noise and outflow air emitted by the outdoor unit
will not affect neighborhood.
2. The location should be well ventilated and dry, in which the outdoor unit
won't be exposed directly to sunlight or strong wind.
3. The location should be able to withstand the weight of outdoor unit.
4. Make sure that the installation follows the requirement of installation
dimension diagram.
5. Select a location which is out of reach for children and far away from animals
or plants.If it is unavoidable, please add the fence for safety purpose.
2 Screw driver
5 Pipe expander
8 Pipe cutter
11 Pressure meter
Indoor unit
1. There should be no obstruction near air
inlet and air outlet.
2. Select a location where the condensat-
ion water can be dispersed easily and
won't affect other people.
3. Select a location which is convenient to
connect the outdoor unit and near the
power socket.
4. Select a location which is out of reach
for children.
5. The location should be able to withstand
the weight of indoor unit and won't incr-
ease noise and vibration.
6. The appliance must be installed 2.5m
above floor.
7. Don't install the indoor unit right above
the electric appliance.
8. Please try your best to keep way from
fluorescent lamp.
23
3 Impact drill
6 Torque wrench
9 Leakage detector
12 Universal meter
14 Measuring tape

Advertisement

Table of Contents
loading

Table of Contents