JVC XV-S40BK Instructions Manual page 39

DOWN MIX
To playback a DVD VIDEO
disc recorded with surround
multichannel audio
correctly, the DOWN MIX
setting must be properly
made according to your
audio system.
Note that this setting affects the output signal from the
AUDIO (both DIGITAL and ANALOG) output jacks when
playing back a DVD VIDEO disc recorded with surround
multichannel audio.
• Lt/Rt
When you enjoy multichannel surround audio by
connecting the unit’s AUDIO output (normally, the
DIGITAL output) to a surround decoder.
• L /R
When you enjoy conventional 2-channel stereo audio
by connecting the unit’s AUDIO output to a stereo
amplifier/receiver or television set, or when you
duplicate audio of a DVD VIDEO disc recorded with
surround audio to your MD, cassette, etc.
NOTE
• The Down mix function does not work when the 3D
PHONIC function is activated.
• The DOWN MIX setting does not affect an MPEG or
Dolby Digital bitstream signal from DIGITAL OUT .
To enjoy the DOWN MIX effect from DIGITAL OUT when
playing back a disc recorded with the MPEG
multichannel or Dolby Digital format, set
“ “
AUDIO OUTPUT to PCM ONLY
• When playing back a disc recorded with DTS, you
cannot get the DOWN MIX effect from both DIGITAL
and ANALOG outputs.
COMPRESSION
Y ou can compress the dynamic
range of the sound if needed.
Using this function, you can
listen to sound at low volumes
easily.
• ON
Audio is played back with the dynamic range
compressed.
• OFF
Audio is played back as it was recorded.
NOTES
• The Compression function works only when playing
back a disc recorded with DOLBY DIGITAL 1CH or 2CH.
The setting is not effective for other discs.
• The Compression function does not work when the 3D
PHONIC function is activated.
All manuals and user guides at all-guides.com
LANGUAGE AUDIO DISPLAY SYSTEM
DIGITAL AUDIO OUTPUT STREAM / PCM
DOWN MIX Lo / Ro
COMPRESSION ON
EXIT
PRESS KEY
“
DIGITAL
“
(see page 36).
LANGUAGE AUDIO DISPLAY SYSTEM
DIGITAL AUDIO OUTPUT STREAM / PCM
DOWN MIX Lo / Ro
COMPRESSION ON
EXIT
PRESS KEY
DISPLAY page
MONITOR TYPE
You can select the monitor
type to match your TV
when you playback DVD
VIDEO discs recorded for
wide screen televisions.
• 4:3 LB (Letter Box Conversion)
When you connect a normal
TV to the unit.
When you play a wide picture
recorded on a DVD VIDEO disc,
the picture is displayed with
bands across the upper and
lower portions of the screen.
• 4:3 PS (Pan Scan Conversion)
When you connect a normal TV to the unit.
When you play a wide picture recorded on a DVD
VIDEO disc, a portion of the picture is automatically
cut off from the left and right sides of the image.
Depending on the disc, it may
not be possible to playback in
this mode. In that case, the
picture is played back as in 4:3
LB mode.
• 16:9 WIDE (Wide T elevision screen)
When you connect a
wide-screen TV to the
unit.
SCREEN SAVER
A television monitor screen may be burned out if a static
picture is displayed for a long time. To prevent this, the
unit automatically activates the screen saver function if a
static picture, such as an on-screen display or menu, is
displayed for over 5 minutes.
• MODE 1
The current picture gets
dark.
• MODE 2
The “screen saver” picture
appears and its brightness
changes.
• OFF
The screen saver function is off.
NOTES
• The monitor screen of a projector or projection TV is
easily burned out if the screen saver mode is set to OFF
and a static picture is displayed for a long time.
• The screen saver function is not activated when the
selected disc is an Audio CD.
Initial settings
English English
English
English
AUDIO DISPLAY SYSTEM
LANGUAGE
MONITOR TYPE 4:3 LB
SCREEN SAVER MODE 2
ON SCREEN GUIDE ON
EXIT
PRESS KEY
AUDIO DISPLAY SYSTEM
LANGUAGE
4:3 LB
MONITOR TYPE
SCREEN SAVER MODE 2
ON
ON SCREEN GUIDE
EXIT
PRESS KEY
!%