GE ASW08 Owner's Manual And Installation Instructions page 4

About the controls on the air conditioner—models with touch pads.
Features and appearance will vary.
ON/OFF
Turns air conditioner on and off.
Display
Shows the set temperature, time remaining
on timer or fan speed (F1–LOW, F2–MED or
F3–HIGH).
MODE
Use to set the air conditioner to COOL or
FAN mode.
Increase
Use to set temperature when in COOL mode.
FAN
Use to set the fan speed to LOW (F1), MED (F2)
or HIGH (F3).
Remote Control
s
To ensure proper operation, aim the
remote control at the signal receiver
on the air conditioner.
s
The remote control signal has a range of
up to 21 feet.
4
Timer
On
Air Conditioner Controls
v w
/Decrease Pads
Remote Control
TIMER
ON—When the air conditioner is off, it can be
set to automatically turn on in 1 to 12 hours at
its previous setting. Each touch will set the
time in hours.
OFF—When the air conditioner is on, it can be
set to automatically turn off in 1 to 12 hours.
Each touch will set the time in hours.
To cancel the timer, press the TIMER pad
until the display time disappears.
Remote Control Signal Receiver
s
Make sure nothing is between the air
conditioner and the remote control that
could block the signal.
s
Make sure batteries are fresh and installed
correctly—see the Care and Cleaning section.