THOMSON WS03 Operating Instructions Manual page 11

Pairing WS03 via NFC function with NFC enabled devices
1. Turn on WS03.
2. Enable NFC and Bluetooth on your phone (NFC settings may be found under your devices' "More/
Additional Settings").
3. Lightly swipe your phone down the NFC logo on top of device, while making minimal contact. The
indicator shall turns solid ON that means successfully paired.
4. Compatibility: Most smartphones with NFC running Android 4.1 "Jellybean" and later.
Answer phone calls by PLAY/PAUSE/TEL button
1. Short Press the PLAY/PAUSE/TEL button to answer an incoming phone call.
2. Long Press to reject phone call.
3. Press again to end a call.
Volume-/Volume+
1. Long Press volume+/- button to turn up/down volume.
2. Short Press volume+/- button to skip to next track or go back to previous one.
3. Either control volume by Bluetooth device.
Connecting external devices (AUX port)
1. You can connect any music device to the WS03 speaker via the AUX port using the cable included.
2. Bluetooth LED indicator blink slowly with voice talk "Aux in Mode".
3. When disconnect Aux-in, it will go back to Bluetooth mode with voice talk "Bluetooth Mode".
4. The speaker will not use the Bluetooth function while connected via this cable.
- EN 4 -