Muting Upon The Reception Of A Phone Call - Kenwood KMM-105 Instruction Manual

TROUBLESHOOTING
Symptom
"NA FILE"
"COPY PRO"
"NO DEVICE"
"NO MUSIC"
• Sound cannot be heard • Reconnect the Android device.
during playback. • Launch any media player application on the Android
• Sound output only from
the Android device. • Relaunch the current media player application or use
• Restart the Android device.
• If this does not solve the problem, the connected
• If USB connection does not work, connect the Android
"NO DEVICE" or "READING" • Reconnect the Android device.
keeps flashing. • If USB connection does not work, connect the Android
Playback is intermittent or
sound skips.
"NO MUSIC"/"ANDROID • Make sure Android device contains playable audio files.
ERROR" • Reconnect the Android device.
• Restart the Android device.
14
ENGLISH
Remedy
Make sure the media (USB) contain supported audio files.
(Page 12)
A copy-protected file is played (USB).
Connect a device (USB), and change the source to USB
again.
Connect a device (USB) that contains playable audio files.
device and start playback.
another media player application.
Android device is unable to route the audio signal to unit.
(Page 13)
device through auxiliary input jack.
device through auxiliary input jack.
Turn off the power saving mode on the Android device.

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial
telephone accessory. (Page 17)
• When a call comes in, "CALL" appears. (The audio system pauses.)
– To continue listening to the audio system during a call, press B SRC.
"CALL" disappears and the audio system resumes.
• When the call ends, "CALL" disappears. (The audio system resumes.)