Table of Contents
Advertisement
DISPLAY SETTINGS
Zone identification for brightness setting
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
[DISPLAY]
[DIMMER]
Dims the illumination.
[ON]: Dimmer is turned on.
[OFF]: Dimmer is turned off.
[DIMMER TIME]: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
Default: [ON]: [6:00PM] or [18:00] ; [OFF]: [6:00AM] or [6:00]
[BRIGHTNESS]
1 Select a zone. (See the illustration above.)
2 [LVL 00] to [LVL 31]: Set the brightness level for the selected zone.
[TEXT SCROLL]
[ONCE]: Scrolls the display information once. ; [AUTO]: Repeats scrolling at
5-second intervals. ; [OFF]: Cancels.
12
ENGLISH
REFERENCES
Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector
Detach the faceplate and clean the connector gently
with a cotton swab. Be careful not to damage the
connector.
For: – Latest firmware updates and latest compatible item list
Visit <www.kenwood.com/cs/ce/>.
Playable files
• Playable audio file for USB mass storage class device:
MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)
.
• Playable USB device file system: FAT12, FAT16, FAT32
Default: [XX]
Even when audio files comply with the standards listed above, playback may be impossible
depending on the types or conditions of media or devices.
• For detailed information and notes about the playable audio files, visit
<www.kenwood.com/cs/ce/audiofile/>.
About USB devices
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.0 A.
Maintenance
More information
– Any other latest information
Connector (on the reverse side
of the faceplate)
Hide quick links:
Advertisement
Table of Contents
