Table of Contents
Advertisement
10
www.aeg.com
Programme
Machine Care
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
info.test@dishwasher-production.com
6. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number
1
2
3
4
5
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode. Instructions on how to
configure the appliance are provided
further in this chapter.
Water (l)
1)
11.2
10.7 - 13.8
10.3 - 12.5
Settings
Values
Rinse aid level
From level 0A to
level 6A
End sound
1b (on)
0b (off)
Auto door open
1o (on)
0o (off)
Key tones
1F (on)
0F (off)
Latest pro‐
1H (on)
gramme selec‐
0H (off)
tion
Energy (kWh)
0.755
0.74 - 1.27
0.78 - 0.95
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
1)
Description
Adjust the level of the rinse aid according
to the necessary dosage.
Factory setting: 4A.
Activate or deactivate the acoustic signal
for the end of a programme.
Factory setting: 0b.
Activate or deactivate the AirDry.
Factory setting: 1o.
Activate or deactivate the sound of the but‐
tons when pressed.
Factory setting: 1F.
Enable or disable the automatic selection
of the most recently used programme and
options.
Factory setting: 0H.
When the appliance is in setting mode,
the display shows a digit and a letter. For
each setting, a dedicated letter is
displayed. The dedicated letters are
indicated in the table.
Duration (min)
180
108 - 187
60
Advertisement
Table of Contents
