Advertisement
7) Click the OK button to save the new settings and the changes will be written to the
Print Server. This may take 2-3 minutes. Wait for the utility to finish.
8) Click QUIT to close the WIRELESS SERVER SEARCH box.
On the Host:
Note – If your Access Point is also a DHCP Server, skip step 1 and go to step 2.
1) Change the TCP/IP settings on the wireless notebook computer Adapter Card to the
address of the "Proxim" Base-Station. Example - 192.168.0.1
Right click the NETWORK Icon
Click PROPERTIES
Down-click and highlight "TCP/IP -> WIRELESS LAN CARD"
Click Properties button for the next screen
In the TCP/IP PROPERTIES box, select the IP ADDRESS tab
Click on... SPECIFY AN IP ADDRESS bullet
o Enter the appropriate IP ADDRESS values for your network
o Example - IP Address: 192.168.0.5 >> 5 for the computer (Tab between
periods)
o Subnet Mask: 255.255.255.0 >> (Tab between periods)
Next, click on the GATEWAY tab in the TCP/IP PROPERTIES box
o In the NEW GATEWAY box, enter the appropriate IP ADDRESS for your
network gateway
o Example - Gateway: IP 192.168.0.1 >> 1 for the Access Point
Click the ADD button
Click OK button
In the lower, right of the Taskbar, click the WIRELESS icon.
o Click Advanced Configuration from the menu that appears
o Click the Configuration tab
o In the Configuration screen, verify or enter the SSID name of the Access
Point
Example – Proxim
o Click the Apply button for any changes that have been made or click the
OK button to proceed to the next screen.
o Click the Apply button in the next screen that appears
o Click OK to close the Wireless configuration window
2) The system will prompt you to REBOOT -
"Do you want to restart your computer now?" Click the YES button.
3) After the system restarts proceed to the next step.
4) Use a WEB browser such as Internet Explorer to access the Access Point's WEB
HOME configuration page and set the WEP encryption to match the Print Server
WEP encryption settings. NOTE: If you have a Proxy Server setting enabled in your
Advertisement
