Advertisement
browser, you will need to disable it temporarily in order to access the Web HOME
page on the Access Point.
5) Type in the address of the Access Point on the address bar of the WEB browser and
hit enter. Example - HTTP://192.168.0.1
6) Find "Wireless" Configuration page for the Access Point and set as follows.
Navigate to the CONFIGURE section for the "Wireless Setup" and match the
WEP Encryption type and value in the "WEP Data Privacy" section to the settings
of the print server.
64 Bit Encryption using a key table like this example - Key 1: 31 32 33 34 35
or 128 Bit Encryption using a key table like this example -
Key 1: 31 32 33 34 35 00 00 00 00 00 00 00 00
WEP Authentication: Open System << Choose this Shared Key
Click SAVE
On the next screen click FINISHED
7) Close the browser.
8) Go to the property settings of the Computer's Adapter Card.
Right click NETWORK Icon
Click PROPERTIES
Highlight the WIRELESS ADAPTER setting
Click PROPERTIES button
Select ENCRYPTION Tab
o Encryption (WEP) - click on the drop-down button and select "64 bit" or
"128 bit"
o Click the CREATE KEYS MANUALLY bullet
o Type in 3132333435 or 31322234350000000000000000
o Click on APPLY button
o Click OK button - Next Screen
o Click OK button - to close the NETWORK box
9) Reboot the system and upon restart check the WIRELESS status monitor
10) If there are collision errors, re-enter the WEP KEY value and test WP-Admin.
Printer Driver Settings:
Advertisement
