Download  Print this page

Installing A Pc Card; Specifications; Interfaces - Epson ActionNote 880C User Manual

Epson actionnote 880c: supplementary guide
Hide thumbs

Advertisement

Installing a PC Card

To install a PC card in one of the slots, follow the instructions in
Chapter 4 of your ActionNote 800 Series User's Guide. Your
system configures most PC cards automatically.
The upper slot on the replicator is slot 2 and the lower slot is
slot 3. Use the CardView™ software installed on your
ActionNote to monitor PC card usage and reconfigure your
cards or system resources if necessary.

Specifications

Interfaces

Parallel
Serial
Video
PCMCIA slots
Mouse
®
Centronics
compatible; 25-pin, D-sub,
fern ale connector; standard S-bit parallel;
supports standard (AT compatible) and
bi-directional (PS/2 compatible) modes
Two RS-232C, programmable,
asynchronous, 9-pin, D-sub male
connectors
Auto-sensing, 15-pin, D-sub, female
connector for analog monitor
Accept two Type 1 or II cards, or one Type
I or II and one Type III; PCMCIA version
2.01 and JEIDA 4.1 compatible
Auto-sensing, 6-pin, mini-DIN connector
for a PSI 2-type pointing device
ActionPort Replicator
7

Advertisement

Table of Contents
loading

  Also See for Epson ActionNote 880C

  Related Manuals for Epson ActionNote 880C