Download  Print this page

Using The Actionport Replicator; Using An External Keyboard Or Mouse - Epson ActionNote 880C User Manual

Epson actionnote 880c: supplementary guide
Hide thumbs

Advertisement

Using the ActionPort Replicator

You use the ports on the replicator in the same way as the ports
on your ActionNote. Follow these steps to connect external
peripherals:
1.
Make sure that both the computer and external device are
turned off.
2.
Connect the device to the appropriate port.
3.
If the connector has retaining screws, tighten them.
Refer to Chapter 4 in your ActionNote 800 Series User's Guide for
more information on connecting external devices.
Note
If you install the optional internal fax/modem in your
ActionNote, you will not be able to use the COM2 serial port
on the replicator. You can disable the fax/modem through
the Setup program if you want to use the second serial port.

Using an External Keyboard or Mouse

The ActionPort Replicator has both a PS/2 mouse port and a
PS/2 keyboard port Although the ports are physically
identical, they cannot be used interchangeably. Be sure to use
the correct port.
6
ActionPort Replicator

Advertisement

Table of Contents
loading

  Also See for Epson ActionNote 880C

  Related Manuals for Epson ActionNote 880C