System Requirements For Smartphones /Tablets; Charging The Nod; 7.4 Use Of Nod - OT Bioelettronica NOD User Manual

Note. If the NOD device is charged while turned
off, the LED will not light up, but the device will
anyway be charging.
7.2 S
YSTEM REQUIREMENTS
T
ABLETS
1. Minimum Android version 4.4 (KitKat)
2. Bluetooth® from 2.1
7.3 C
HARGING THE NOD
Behaviour of the device during charging
During the charging phase, the red "Recharge" LED
located on the right side of the NOD device
(posterior view) flashes red until it is recharged,
then the LED turns off.
Charge the device for at least 2 hours
before using it.

7.4 Use of NOD

Application and data acquisition with the
NOD System
To correctly apply the NOD system, proceed as
follows:
Smartphone / Tablet
•
pair the NOD device to the Smartphone or
Tablet via Bluetooth®;
• launch the Physio application;
• select from the device list the name of the NOD
device (only the first time);
• select the desired functionality;
• if necessary, reset the offset via the App and
proceed with signal acquisition.
FOR SMARTPHONES
12
/