Table of Contents
Advertisement
4.
Note: Residual water may run out.
5.
6.
7.
To prevent unused detergent from flowing into the outlet during
²
the next wash cycle: Pour approx. 1 litre of water into dispenser II
and start the Drain programme.
Drainage hose on the siphon blocked
1.
Note: Residual water may run out!
2.
3.
4.
36
Take the drainage hose out of the holder. Remove the
sealing cap, drain water into a suitable receptacle.
Press on sealing cap and insert drainage hose into the
holder.
Carefully unscrew the pump cover. Clean the interior, pump
cover thread and pump housing (fan impeller in the
detergent-solution pump must rotate).
Reinsert and screw on pump cover. Handle should be
vertical.
Insert service flap (1), engage (2) and close (3).
Switch off the appliance. Pull out the mains plug!
Loosen hose clip, carefully remove drainage hose.
Clean drainage hose and siphon spigot.
Re-attach drainage hose and secure connection point with
hose clip.
Advertisement
Table of Contents
