Table of Contents
Advertisement
Motion Control Levers
The machine's speed and direction are continuously variable
using the two steering controls. The steering controls can
be moved forward or backward about a neutral position.
Furthermore, there is a neutral position, which is locked if the
steering controls are moved outward.
When both controls are in the neutral position (N), the machine
stands still.
By moving both controls an equal amount forward or
backward, the machine moves in a straight line forward or
backward respectively.
For example, to turn right while moving forward, move the right
control towards the neutral position. The rotation of the right
wheel is reduced and the machine turns to the right.
Zero turn can be achieved by moving one control backward
(behind the neutral position) and carefully moving the other
steering control forward from its neutral position. The rotation
direction when zero turning is determined by which steering
control is moved backward behind the neutral position.
If the left steering control is pulled backward, the machine
turns to the left. Use extra care when using this maneuver.
If the steering controls are in uneven positions when standing
still or do not fit in the slots for moving the controls outward,
they can be adjusted
CONTROLS
Forward
Neutral
Neutral
Lock
Reverse
WARNING! The machine can turn very rapidly if one
steering control is moved much further forward than the
other.
Park Brake
The park brake is found on the left of the machine. Push the
release button and pull the lever backward to activate the
brake, push forward to release it.
The park brake is designed to hold the mower from moving
and is not intended for use in stopping the mower while it is in
motion. The engine will stop if the park brake is engaged while
the control levers are in the drive position.
IMPORTANT INFORMATION The machine must stand still
when applying the park brake. Always set the park brake
before dismounting. Release the park brake before moving
the mower.
Throttle Control
The throttle control regulates the engine speed and thereby
the rate of rotation of the blades, assuming the blade switch is
pulled out, see Engaging the Mower Deck.
To increase or decrease the engine speed, the control is
moved forward or back respectively.
Avoid idling the engine for long periods, as there is a risk
of fouling the spark plugs. USE FULL THROTTLE WHEN
MOWING, for best mower performance and battery charging.
12
Advertisement
Table of Contents
