Body & Accessories
Control System
Features
•
The control system of the BT-50 has the following new features:
–
DLC-2
–
HS-CAN connection between PCM and DLC-2 for communication with M-MDS
Data Link Connector
•
The DLC-2 is located under the dashboard next to the centre panel.
•
The 17-pin DLC-1, known from the previous B-Series, is installed on the left rear side in
the engine compartment. It cannot be used for communication with M-MDS.
NOTE: For communication with M-MDS the control modules of the ABS (Antilock-Brake
System) and the SAS are connected to DLC-2 via ISO (International Standard
Organisation) bus.
Service Training BT-50
Control System
09-25