Yamaha Clavinova CVP-805 Reference Manual page 98

Local Control
System Transmit
Exclusive
Message
Receive
Chord Transmit
System
Exclusive
Receive
Message
Transmit – MIDI Transmit Channel Settings
The explanations here apply when you call up the "Transmit" display in step 2 on
channel is used for each part when MIDI data is transmitted from this instrument.
1
For each Part, select the MIDI Transmit Channel with which the MIDI data of the
corresponding Part is to be transmitted.
With the exception of the two parts below, the configuration of the parts is the same as those already explained
elsewhere in the Owner's Manual.
Upper:
• A keyboard part played on the right side of the keyboard from the Left Split Point.
Lower:
• A keyboard part played on the left side of the keyboard from the Left Split Point. This is not affected by
the on/off status of the [ACMP ON/OFF] button.
NOTE
If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single
channel — resulting in unexpected sounds and possible glitches in the connected MIDI device.
NOTE
Protected Songs cannot be transmitted even if the proper Song channels 1 – 16 are set to be transmitted.
CVP-809/CVP-805 Reference Manual
Turns the Local Control for each part on or off. When Local Control is set to "On," the
keyboard of the instrument controls its own (local) internal tone generator, allowing the
internal Voices to be played directly from the keyboard. If you set Local Control to "Off,"
the keyboard and controllers are internally disconnected from the instrument's tone
generator section so that no sound is output when you play the keyboard or use the
controllers. For example, this allows you to use an external MIDI sequencer to play the
instrument's internal Voices, and use the instrument keyboard to record notes to the
external sequencer and/or play an external tone generator.
Determines whether MIDI System Exclusive messages are transmitted (On) or not (Off)
from this instrument.
Determines whether MIDI System Exclusive messages are recognized (On) or not (Off)
by this instrument.
Determines whether MIDI chord system exclusive data (Chord Detect: root and type) are
transmitted (On) or not (Off) from this instrument.
Determines whether MIDI chord system exclusive data (Chord Detect: root and type) are
recognized (On) or not (Off) by this instrument.
1
Lets you alternate between two pages.
The dots corresponding to each channel (1–16) flash briefly whenever
any data is transmitted on the channel(s).
page 96. This determines which MIDI
2
MIDI Settings
98