Choosing A Place For The Scanner; Removing The Transportation Screw - Epson ES-600C User Manual

1

Choosing a place for the scanner

You should consider the following when selecting a location for
your scanner:
Place the scanner on a flat, horizontal, stable surface. If the
scanner is tilted or at an angle, it cannot operate properly.
Place the scanner close enough to the computer for the
cable to reach.
Allow some space behind the scanner for the cables, and
make sure to place the scanner where you can easily
unplug the power cord. Also allow sufficient space above
the scanner so that you can easily place and adjust
documents on the scanner.
Keep the scanner away from high temperatures and
humidity and places subject to rapid changes of
temperature and humidity.
Keep the scanner away from direct sunlight and strong
light sources.
Avoid places subject to shocks and vibrations.
2

Removing the transportation screw

before connecting the scanner to a power source, you must
remove the transportation screw.
1. Place the scanner on a flat, stable surface so that its rear
panel is facing you.
2. Locate the round screw knob in the middle of the rear panel
under the word CLAMP.
1-2 setup