Service Mode; Error Code Memory Function - Panasonic DMC-FS6P Service Manual

6 Service Mode

6.1.

Error Code Memory Function

1. General description
This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the
latest. When the error is occurred more than 16, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly (i.e.,when the unit is powered on by the battery,
the battery is pulled out) The error code is memorized to FLASH ROM when the unit has just before powered off.
2. How to display
The error code can be displayed by ordering the following procedure:
• Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
NOTE:
*Since this unit has built-in memory, it can be performed without inserting SD memory card.
*It is not a matter of the setting condition of Recording mode (such as "normal picture/ iA / scene mode) to display the error
code.
• Step 1. The temporary cancellation of "INITIAL SETTINGS":
Set the [REC]/[PLAYBACK] selector switch to "[ REC ] (Camera mark)".
While keep pressing "[ UP ] of Cursor button" and [ iA ] button simultaneously, turn the Power on.
• Step 2. Execute the error code display mode:
Press the "[ LEFT ] of Cursor button", [ MENU/SET ] button and [ iA ] button simultaneously.
The display is changed as shown below when the above buttons are pressed simultaneously.
Normal display → Error code display → Operation history display → Normal display → .....
Example of Error Code Display
18