Advertisement
ADJUSTING CRIMP
• To adjust crimping pressure, remove the set
screw located behind the logo (FIG 6) and
utilize a pair of pliers on the cam stud to
adjust crimping pressure (FIG 7).
• Clockwise decreases pressure,
counterclockwise increases pressure.
When finished adjusting reinstall set screw.
The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: tech@eastwood.com
© Copyright 2020 Eastwood Automotive Group LLC
If you have any questions about the use of this product, please contact
PDF version of this manual is available at eastwood.com
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
800.343.9353 eastwood.com
FIG. 6
FIG. 7
9/20
Instruction item #33858Q
Rev 2
Advertisement
