Page 2
The EASTWOOD CRIMP-RIGHT WEATHER-TIGHT CONNECTOR CRIMPER SET brings a valuable, previously professional-only Weather-Tight connector installation capability to the serious automotive DIY’er. Replace damaged factory installed connectors or add accessories while maintaining full factory wire harness integrity. CONTENTS (1) Quick Jaw Change, Cushion Grip, Ratcheting Weather Pack Crimping Tool (2) Sets of Interchangeable Crimping Dies: - Set of H6 Dies for 18 to 22 Ga.
• Failure to follow all warnings can result in tool damage or physical injury. EXPLOSION HAZARD • Always wear ANSI approved eye protection when operating this tool. • To prevent injury, keep fingers away from the jaw opening area and all moving parts while operating. To order parts and supplies: 800.343.9353 >> eastwood.com...
(FIG 3). • Set Crimp Terminal into Female Die with the large “U” feature nested into the “U” feature of the Die (FIG 4). Silicone Connector Wire Seal Insert FIG. 4 Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
Page 5
FIG. 7 the Housing (FIG 8). • The terminal crimp and installation is now complete and the process is repeated for additional terminals if required. Push In FIG. 8 To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 6
Housing (FIG 9). • The retaining wings of the Terminal will be pushed inward and the wire and Terminal assembly will release. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
Page 7
NOTES To order parts and supplies: 800.343.9353 >> eastwood.com...