Advertisement
The EASTWOOD ELITE INLINE CRIMP TOOL quickly and easily crimps any standard solderless
connector in sizes 10-22 AWG. The Patent Pending Inline Jaw design allows users to get into areas
never before possible, making work under dashes, in recessed electrical boxes, and any other tight
area easier than ever. Consistent, precise crimps are easily accomplished with the ratcheting handles
and adjustable crimp pressure.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information
provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
2
READ INSTRUCTIONS
• Thoroughly read and understand these product instructions before utilizing
the Inline Crimp Tool.
• Keep these product instructions for future reference.
• DO NOT utilize tool with live wires, ensure power source has been
disconnected before working on electrical connections.
• Always wear ANSI approved eyewear when operating this tool.
• To prevent injury, keep fingers away from the jaw opening area and all
moving parts while operating.
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
ELECTROCUTION HAZARD!
PROJECTILE HAZARD!
PINCH HAZARD!
Advertisement
