Switching On And Off Your Midland Btmesh - Midland BTMESH Instruction Manual

Step 3.Then, tighten more the two screws in order to firmly fix the clamp in
place on the left side of the helmet.
If necessary, you can use also the rubber plate in order to have more grip for
the screw clamp. Just use the two short screw to fix the rubber plate on the
slide-in mount and tighten the screw plate again.
Fitting and removing your Midland BTMESH
The BTMESH can be easily fitted onto the helmet by sliding it downwards on
the sliding mounting kit. BTMESH is maintained in position thanks to the fixing
clip located on the upper section (A).
To detach the BTMESH, simply press the fixing clip and push the unit upwards.
www.midlandeurope.com
Rubber plate
Lock

Switching ON and OFF your Midland BTMESH

Switching the unit on:
Press and hold "Middle" button for approximately 3 seconds until the BLUE
indicator lights.
Switching the unit off:
Press and hold both "Middle" and "Backward" buttons together for approxi-
mately 3 seconds until the RED indicator flashes 3 times, thus lessening the
chances that you might turn off the unit accidentally (especially whilst wearing
gloves).
Operative "mode"
The BTMESH can operate in three main "modes": Mesh, Phone and FM Ra-
dio.
The 3 multi function buttons can have different functionality depending on
which mode the unit is at that moment.
› In "Mesh mode" the three buttons let you manage the Mesh and Intercom
communications between driver and passenger or bike to bike.
› In "Phone mode" you can manage your Bluetooth mobile phone to place/
answer a phone call or to listen to the music. Please use your phone respon-
sibly and safely.
› In "FM Radio mode" you can listen to your favourite radio station in stereo,
seek for a specific radio station and save it (6 memories are available).
Unlock
A
5