Table of Contents
Advertisement
IRIDIUM
2.7
How to Change the Antenna Cable Position
In some installations, it may be convenient to change the
antenna connection to a position at the top of the satellite
transceiver box.
First face the back of the satellite transceiver box.
Now, unscrew the four screws holding the L-band trans-
ceiver (LBT) unit. Note that you will need both the screws
and the spring washers later on. Unscrew the antenna
connection bush at the bottom of the satellite transceiver
box by turning the slimline nut anticlockwise.
0125
Next, untangle the LBT unit by pulling the antenna bush
easily upwards and out of the hole.
‚
Installation
9
Advertisement
Table of Contents
