Table of Contents
Advertisement
Installation
2.6
How to Remove the Finishing Cover
You may need to dismount the satellite transceiver box from the wall, e.g. in connection with service.
For access to the mounting screws, the finishing cover can be removed from the satellite transceiver box as follows:
Put a screwdriver into the slot in the printed circuit board beside the SIM card reader, and press gently
to unhook the plastic spear.
‚
While pressing with the screwdriver, lift up the same side of the finishing cover slightly to loosen it.
ƒ
Repeat this procedure on the other side of the finishing cover.
„
You can now detach the finishing cover from the satellite transceiver box by pulling it gently upwards.
8
‚
ƒ
„
IRIDIUM
0125
Advertisement
Table of Contents
