Specifications; General Power Tool Safety Warnings - Makita BO4900V Instruction Manual

ENGLISH
1. Speed adjusting dial
2. Lock button
3. Switch trigger
4. Clamp lever
5. Conventional type of abrasive
paper with pre-punched holes
6. Pad for conventional type of
abrasive paper
7. Punch plate
8. Conventional type of abrasive
paper without pre-punched holes

SPECIFICATIONS

Model
Pad size
Abrasive paper size
Orbits per minute (min
Sanding stroke rate (min
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.... Read instruction manual.
.............. DOUBLE INSULATION
................. Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately and
returned to an environmentally
compatible recycling facility.
4
Explanation of general view
9. Hook-and-loop type of abrasive
paper with pre-punched holes
10. Pad for hook-and-loop type of
abrasive paper
11. Pad
12. Screws
13. Screwdriver
14. Groove
15. Front fixing cardboard
16. Paper dust bag
17. Claws
BO4900V
115 mm x 229 mm
115 mm x 280 mm
-1
) 4,000 - 10,000
-1
) 8,000 - 20,000
289 mm
2.9 kg
END201-7
18. Upper part
19. Guide
20. Notch
21. Push button
22. Dust nozzle
23. Hook
24. Dust bag
BO4900
115 mm x 229 mm
115 mm x 280 mm
10,000
20,000
289 mm
2.9 kg
/II
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
BO4901
115 mm x 229 mm
115 mm x 280 mm
10,000
20,000
289 mm
2.8 kg
ENE052-1
ENF002-1
GEA012-2