SNOWJOE sunjoe 24V-DD-CT Operator's Manual

OPERATOR'S MANUAL
A Division of Snow Joe , LLC
®
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety
m
WARNING!
When using the drill/driver basic safety
precautions should always be followed to reduce the risk of
fire, electric shock, and personal injury. These include:
Work Area Safety
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe
distance away from the work area.
3. Do not operate power tools in explosive atmospheres
– Such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the dust
or fumes.
Personal Safety
1. Stay alert – Watch what you are doing. Use common
sense. Do not operate the drill/driver when you are tired,
or under the influence of alcohol or drugs.
2. Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid unintentional starting – Do not carry the drill/driver
with your finger on the trigger. Make sure the switch is off
before connecting the drill/driver to power source.
4. Do not overreach – Keep proper footing and balance at
all times. Proper footing and balance enable better control
of the cordless drill/driver in unexpected situations.
5. Use personal protective equipment – Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
© 2019 by Snow Joe , LLC
®
All rights reserved. Original instructions.
R
CORDLESS DRILL/DRIVER – CORE TOOL
24-VOLT MAX* | 2-SPEED
Model 24V-DD-CT
6. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. – Use of dust collection
can reduce dust-related hazards.
7. Do not use on a ladder or unstable support –
Stable footing on a solid surface enables better control of
the power tool in unexpected situations.
Tool Use and Care
1. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
2. Do not use drill/driver if switch does not turn on or off
– The drill/driver that cannot be controlled with the switch
is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or
battery pack from the drill/driver before making any
adjustments, changing accessories, or storing the
drill/driver – Such preventive safety measures reduce risk
of starting the power tool accidentally.
4. Store idle drill/driver out of reach of children or other
untrained persons – Drill/driver is dangerous in the hands
of untrained users.
5. Maintain cordless drill/driver – Check for misalignment
or binding of moving parts, breakage of parts, and any
other condition that may affect the drill/driver's operation.
If damaged, have the drill/driver serviced before using.
Many accidents are caused by poorly maintained tools.
6. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed – Use of the power tool for operations different
from those intended could result in a hazardous situation.
Battery Tool Use and Care
1. Recharge only with the charger specified by the
manufacturer – A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
2. Charge internal battery at ambient temperatures
between 50ºF – 104ºF (10ºC – 40ºF).
3. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, seek
medical help – Liquid ejected from the battery may cause
irritation or burns.
4. Use power tools only with specifically designated
battery packs – Use of any other battery packs may
create a risk of injury and fire.
1
Form No. SJ-24V-DD-CT-880E-M
SAVE THESE INSTRUCTIONS