CORDLESS SCREWDRIVER 4-VOLT MAX | LED LIGHT | BIT KIT | FLEXIBLE BIT EXTENDER OPERATOR’S MANUAL Model PJ4SDFLX-RM A Division of Snow Joe , LLC ® Form No. SJ-PJ4SDFLX-RM-880E-M-V1 IMPORTANT! 6. Remove accessories or attachments before turning screwdriver on – An accessory that is left attached to a Safety Instructions rotating part of the tool may result in personal injury.
® ® 14. Do not carry the screwdriver with your finger on the 1-866-SNOWJOE (1-866-766-9563). Only identical forward + reverse selector switch. replacement parts should be utilized for repairs. This will 15. Do not abuse battery charger cord.
Page 4
+ Sun Joe ® ® ® customer service center at 1-866-SNOWJOE (1-866-766-9563). Incorrect reassembly poses a risk of electric shock, electrocution or fire. 9. To reduce the risk of electric shock, unplug the charger from the outlet before cleaning the tool.
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, SAFETY ALERT –...
Know Your Cordless Screwdriver Read the owner’s manual and safety instructions carefully before operating the cordless screwdriver. Compare the illustration below to the cordless screwdriver in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Page 7
Snow Joe + Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563). NOTE: Do not discard the shipping carton and packaging material until you are ready to use your new cordless screwdriver. The packaging is made of recyclable Charging materials.
Pivoting Head NOTE: The screwdriver has been shipped in a low charge condition and should be fully charged before use. The head of the tool can be pivoted for optimum versatility. 1. Plug the charger adapter into an appropriate AC power 1.
Page 9
Selecting the Direction of Rotation Fig. 7 WARNING! Be sure the trigger switch is released when changing the position of the forward + reverse selector switch. Always store the tool in the locked/off position. NOTE: Always check the direction of the cordless screwdriver rotation before use.
Page 10
Storage Starting + Stopping WARNING! Be sure the trigger switch is released when Bits Storage changing the position of the forward + reverse selector switch. 1. 50 mm bits provided with the screwdriver can be placed in Always store the tool in the locked/off position. the storage area located on both sides (Fig.
• If your Power Joe PJ4SDFLX-RM cordless screwdriver ® requires service or maintenance, please call the Snow Joe ® + Sun Joe customer service center at 1-866-SNOWJOE ® (1-866-766-9563).
Troubleshooting WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself! Suspected malfunctions, disturbances or damages are often due to causes that the user can fix themselves. Follow the below troubleshooting guidelines when checking the unit.
Page 13
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ®...
Page 14
To obtain a replacement part or product, please visit warranty. Some states do not allow exclusions of incidental or snowjoe.com/help or email us at help@snowjoe.com for consequential damages so the above exclusions may not apply instructions. Please be sure to register your unit beforehand to in all states.