Epson PowerLite 8100 User Manual page 72

■
The lamp(s) in this product contain mercury. Please consult your state and local regulations
regarding disposal or recycling. Do not put in the trash.
■
Allow the lamp to cool for one hour before replacing it.
■
Unplug the projector during lightning storms or when not in use for extended periods.
■
Don't place the projector or remote control on top of heat-producing equipment.
■
If you use the projector in a country other than where you purchased it, use the correct power cord
for that country.
■
Don't stand on the projector or place heavy objects on it.
■ Don't use the projector outside of the required temperature range of 41 to 95 °F
(5 to 35 °C). Doing so may cause an unstable display and could lead to projector damage.
■ Don't store the projector outside of the required temperature range of 14 to 140 °F
(–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage
to the case.
WARNING: The cords included with this product contain chemicals, including lead, known to the
State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This
notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code § 25249.5 and
following.)
72
Notices