Hitachi DV 20VB2 Handling Instructions Manual page 8

English
4. Inspecting the carbon brushes
For your continued safety and electrical shock
protection, carbon brush inspection and replacem ent
on this tool should ONLY be perform ed by a Hitachi
Authorized Service Center.
5. Service parts list
CAUTION
Repair, m odification and inspection of Hitachi Pow er
Tools m ust be carried out by a Hitachi Authorized
Service Center.
This Parts List w ill be helpful if presented w ith the
tool to the Hitachi Authorized Service Center w hen
requesting repair or other m aintenance.
In the operation and m aintenance of pow er tools, the
safety regulations and standards prescribed in each
country m ust be observed.
M ODIFICATION
Hitachi Pow er Tools are constantly being im proved
and m odified to incorporate the latest technological
advancem ents.
Accordingly, som e parts m ay be changed w ithout
prior notice.
NOTE
Due to HITACHI's continuing program of research and
developm ent, the specifications herein are subject to
change w ithout prior notice.
Information concerning airborne noise and vibration
The m easured values w ere determ ined according to
EN60745.
The typical A-w eighted sound pressure level: 99 dB (A).
The typical A-w eighted sound pow er level: 110 dB (A).
Wear ear protection.
The typical w eighted root m ean square acceleration
value: 10 m /s .
2
7