Table of Contents
Advertisement
Quick Links
RXT135E
Inverter Welder
Model: RXT135E
General instruction for installation use and maintenance
Protect yourself and others by observing all safety information, warnings, and cautions.
Failure to comply with instructions could result in personal injury and/or damage to product
or property.
Please retain instructions for future reference.
Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ross RXT135E
Summary of Contents for Ross RXT135E
- Page 1 RXT135E Inverter Welder Model: RXT135E General instruction for installation use and maintenance Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property.
-
Page 2: General Description
RXT135E IMPORTANT Please read all of the safety and operating instructions carefully before using this product. Please pay particular attention to all sections of this manual that carry warning symbols and notices. WARNING! This is a Warning symbol. This symbol is used throughout the manual whenever there is a risk of personal injury. - Page 3 RXT135E WARNING! SAFETY INSTRUCTIONS The user of this welder is responsible for his own and the safety of others. It is most impor- tant to read, learn and respect the rules in this user guide. When using this welder, basic safety precautions, including the following, should be followed to reduce the risk of fire, electric shock and personal injury.
-
Page 4: Switching Off
RXT135E SAFETY INSTRUCTIONS … cont DRESS PROPERLY Use protective gloves and fire resistant protective clothing when using the welder. Avoid ex- posing skin to the ultraviolet rays produced by the arc. ALWAYS USE THE WELDING MASK Under no circumstances should the welder be operated unless the welding mask is protecting the eyes and face. -
Page 5: Additional Precautions
RXT135E ADDITIONAL PRECAUTIONS WELDING OPERATIONS: In environments with increased risk of electric shock; In confined spaces; In the presence of flammable or explosive materials; MUST BE evaluated in advance by an “expert supervisor” and must always be carried out in the presence of other people trained to intervene in emergencies. -
Page 6: Warning Symbols
RXT135E WARNING SYMBOLS The following warning symbols are to remind you of the safety precautions you should take when using the welder. WARNING! Read this User Guide carefully before using the welder and keep it in a safe place for future reference. -
Page 7: The Rating Plate
RXT135E THE RATING PLATE The rating plate is shown on the side of the welder and displays the following symbols and information. Single phase frequency conversion and Output open circuit voltage rectifier Manual metal arc welding with covered Three pin attachment plug... - Page 8 RXT135E 1 At Rear Know you welder. ON/OFF Switch Carry handle Output current control. The position of the knob will indicate the approximate welding current. Note: Set the welding current based on the size of welding electrode to be used. See page 9.
- Page 9 RXT135E ARC WELDING PROCEDURE Before commencing, make sure that your hand held welding mask or welding helmet is in po- sition to protect your eyes. It is also advisable to wear gloves and clothing, which cover the hands and arms to prevent flash burns.
- Page 10 RXT135E TIG WELDING PROCEDURE Before commencing, make sure that your hand held welding mask or welding helmet is in po- sition to protect your eyes. It is also advisable to wear gloves and clothing, which cover the hands and arms to prevent flash burns.
-
Page 11: Thermostatic Protection
Note: Consumable items such as clamps and electrode holders not covered by warranty. Distributed in Australia by J W Ross and Sons ( Australia ) Pty Ltd. PO Box 352 North Ryde BC, NSW, 1670...
Need help?
Do you have a question about the RXT135E and is the answer not in the manual?
Questions and answers