Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ross RXT170P
Summary of Contents for Ross RXT170P
- Page 1 Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference! RXT170P ROSSWELDING...
- Page 2 Page 1...
-
Page 3: General Description
A yellow pilot lamp in the front panel will light to indicate thermal protection intervention and indicated that the duty cycle of the unit has been exceeded. PRODUCT SPECIFICATION Item RXT170P Input Power 230 AC Frequency Phase No. - Page 4 WARNING! SAFETY INSTRUCTIONS The user of this welder is responsible for his own and the safety of others. It is most impor- tant to read, learn and respect the rules in this user guide. When using this welder, basic safety precautions, including the following, should be followed to reduce the risk of fire, electric shock and personal injury.
-
Page 5: Switching Off
SAFETY INSTRUCTIONS … cont DRESS PROPERLY Use protective gloves and fire resistant protective clothing when using the welder. Avoid ex- posing skin to the ultraviolet rays produced by the arc. ALWAYS USE THE WELDING MASK Under no circumstances should the welder be operated unless the welding mask is protecting the eyes and face. -
Page 6: Additional Precautions
ADDITIONAL PRECAUTIONS WELDING OPERATIONS: In environments with increased risk of electric shock; In confined spaces; In the presence of flammable or explosive materials; MUST BE evaluated in advance by an “expert supervisor” and must always be carried out in the presence of other people trained to intervene in emergencies. POSITION and HANDLING Position the welding machine on a horizontal surface that is able to support the weight: otherwise (e.g. -
Page 7: Warning Symbols
WARNING SYMBOLS The following warning symbols are to remind you of the safety precautions you should take when using the welder. WARNING! Read this User Guide carefully before using the welder and keep it in a safe place for future reference. WARNING! When using this welder, avoid direct contact with the welding circuit. -
Page 8: The Rating Plate
THE RATING PLATE The rating plate is fitted to the front of the welder and displays the following symbols and information. RXT170P AS60974-1 49A/22.2V - 156A/26.4V (170A Peak) ~ 50Hz = 48V 23.2 24.6 26.4 = 230V = 38A = 12.5A... - Page 9 Parts Identification 1) On/off switch When the switch is in the “ O” or OFF position means the power OFF . When the switch in the “1” or ON position means the power is ON 2) Output power Adjust the Knob according to the metal thickness. ( also see 6 below) 3) Electrode holder 4) Earth cable Use earth clamp to connect earth cable with work piece...
-
Page 10: Welding Procedure
WELDING PROCEDURE Before commencing, make sure that your hand held welding mask or welding helmet is in position to protect your eyes. It is also advisable to wear gloves and clothing, which cover the hands and arms to prevent flash burns. Striking Arc. -
Page 11: Thermostatic Protection
THERMOSTATIC PROTECTION This welder is automatically protected from overheating by a thermal overload cut out protec- tor. If the transformer overheats the overload cut out protector will activate and cut off. The amber light will illuminate to show that the cut out has operated. After cooling the lamp will extinguish and the protector will reconnect the supply circuit. -
Page 12: Warranty
Should service become necessary during the warranty period, the purchaser should contact an Authorised Service Centre or J W Ross. In order to obtain warranty service, the purchaser must present the store receipt showing the name of the retailer and the date of purchase.
Need help?
Do you have a question about the RXT170P and is the answer not in the manual?
Questions and answers