Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele Novotronic W 1930i
Summary of Contents for Miele Novotronic W 1930i
- Page 1 All manuals and user guides at all-guides.com Operating instructions for the W 1930i Washing Machine ö To prevent accidents and reduce the risk of damaging the machine, read the Operating Manual before installing or using the machine. M.-Nr. 04 612 680...
-
Page 2: Table Of Contents
All manuals and user guides at all-guides.com Contents Contents Guide to the machine..........3 Warning and Safety instructions . -
Page 3: Guide To The Machine
All manuals and user guides at all-guides.com Guide to the machine Guide to the machine 1 Supply cable 7 Inner door panel 2 High pressure inlet hoses 8 Four height adjustable legs 3 Flexible drain hose, with detachable 9 Access panel for lint filter and drain swivel elbow pump 4 Detergent dispenser drawer... - Page 4 All manuals and user guides at all-guides.com Guide to the machine Guide to the machine Detergent dispenser drawer Compartment i - for the pre-wash. Compartment j - for the main wash. Compartment (with lid) - for fabric softener or starch. “Delay start”...
-
Page 5: Warning And Safety Instructions
All manuals and user guides at all-guides.com Important safety instructions Important safety instructions WARNING – To reduce the risk of 9. Do not add gasoline, dry-clean- fire, electric shock, or injury to per- ing solvents, or other flammable sons when using your appliance, fol- or explosive substances to the low basic precautions, including the wash water. -
Page 6: Help Protect Our Environment
All manuals and user guides at all-guides.com OPERATING INSTRUCTIONS Help protect our environment OPERATING INSTRUCTIONS Help protect our environment Disposal of your old machine Warning - To reduce the risk of fire, electric shock, or injury to persons, Old machines contain materials which read the IMPORTANT SAFETY IN- can be recycled. -
Page 7: Economical Usage
– Use only the correct amount of deter- gent required for the water hardness The automatic load control feature en- in your area. Miele recommends the sures the correct water level for the use of powder detergents, as their type of fabric and load being washed... -
Page 8: Preparing The Laundry
All manuals and user guides at all-guides.com Preparing the Laundry Preparing the Laundry The headings numbered ( ,...) Dark fabrics often contain “excess dye” show the operating sequence and can and should be washed separately sev- be used as a brief guide. eral times before being included in a mixed load. - Page 9 All manuals and user guides at all-guides.com Preparing the Laundry Preparing the Laundry Press the “Door” button to open To start a program the door Turn the program selector Load the machine to Finish / Start Unfold the laundry and place it in the Press the “ON/OFF”...
-
Page 10: End Of Program
You may seriously injure yourself. If the drum turns with the door open, contact the Miele Service Department. Check the folds in the door seal for any small articles such as but- tons or nails which may be lodged there. -
Page 11: Changing The Program Sequence
All manuals and user guides at all-guides.com Changing the program sequence Changing the program sequence To cancel a program: To omit a program stage: Turn the program selector to “Fin- A program stage must first be reached ish/Start”. to be omitted: Turn the program selector to To interrupt a program: “Finish/Start”... -
Page 12: Adding Detergent
(pre wash, if necessary) at cause... the beginning of each wash cycle. Due to the Miele “Eco-System”, ...too little detergent can result in: manufacturer’s recommended amount of detergent is generally sufficient for – gray laundry excellent wash results. -
Page 13: Adding Fabric Softener Or Starch
All manuals and user guides at all-guides.com Adding fabric softener or starch Adding fabric softener or starch If fabric softener is desired, it will work dispenser drawer was opened during more effectively and be gentler on the the last rinse cycle, thereby interrupting clothes if it is dispensed in the final the distribution of fabric softener. -
Page 14: Program Selection
All manuals and user guides at all-guides.com Program selection Program selection Program Temperature range Fabric COTTONS 85 - 105°F For dark colored items. For cotton fabrics without 105 - 120°F For light colored items. special finishes. 140 - 170°F Exclusively white items. PERMANENT PRESS 85°... - Page 15 All manuals and user guides at all-guides.com max. load Additional options Normal wash cycle Rapid wash available cycle 11 lbs Pre-wash Available Available Water plus Gentle wash 4.5 lbs Pre-wash Available Available Water plus Gentle wash 2 lbs Pre-wash Available Available Gentle wash 2 lbs...
-
Page 16: Program Sequence
All manuals and user guides at all-guides.com Program sequence Program sequence COTTONS PERMANENT FINE/ PRESS DELICATES Pre-wash Selectable Selectable Selectable ß ß ß Main wash ß ß Interim rinse – ß ß Graduated rinse – No. of rinses ß Rinse and interim spin –... - Page 17 All manuals and user guides at all-guides.com WOOLENS Starch Spin Fine rinse ß – – – ß – – – – – – – – – – – – – – – – – – – – – max. 900 max.
-
Page 18: Textile Care Symbols
All manuals and user guides at all-guides.com Textile care symbols Textile care symbols Some clothing manufactures have Hand wash started placing textile care symbols on do not wash their products. The following is an ex- planation of some of these symbols. dry clean only do not dry clean Washing (°C) -
Page 19: Additional Options
All manuals and user guides at all-guides.com Additional options Additional options By selecting one or more pushbutton The “Water plus” option is available in functions, basic programs can be tai- the following programs: lored to the type of laundry being The wash and rinse cycles for COT- washed. -
Page 20: Delay Start/Time Remaining Indicator
All manuals and user guides at all-guides.com Delay start/Time remaining indicator Delay start/Time remaining indicator Remaining time Time display “H:min” The remaining time for program com- The Time display has a dual function. pletion is shown in hours and minutes The Delayed start is activated by as soon as: pressing the button, or;... -
Page 21: User-Maintenance Instructions
A stainless steel cleaner specially for- mulated for use in washing ma- chines is available from the Miele Parts Department. Do not use abrasive cleaners or sol- Clean the dispenser compartments vents. - Page 22 All manuals and user guides at all-guides.com Cleaning and care Cleaning and care Place a 2 quart capacity container Cleaning the drain pump and underneath the drain tube. lint trap. Occasionally small objects, (buttons, coins, etc.), may find their way into the lint trap.
- Page 23 All manuals and user guides at all-guides.com Cleaning and Care Cleaning and Care Once the flow of water stops, remove the lint trap and clean it. Remove any foreign objects or lint. Clean inside of the lint trap housing. Remove any detergent deposits or foreign objects from the thread of the fil- ter housing and filter unit before replac- Turn the drain pump impeller (in the...
- Page 24 If a replacement is necessary, use only To clean the filter in the inlet hose: a genuine Miele inlet hose as other Turn off the valve. hoses may burst under pressure. Carefully unscrew the inlet hose from...
-
Page 25: Problem Solving Guide
All manuals and user guides at all-guides.com Problem solving guide Problem solving guide Any work done on the electrical components of this appliance should only be performed by a qualified and trained person in accordance with all local and national codes and regulations. Unauthorized repairs may result in personal injury and damage to the machine. - Page 26 All manuals and user guides at all-guides.com Problem solving guide Problem solving guide What to do if, . . . Cause . . . Remedy . . . There is an internal problem. Restart the program. If the . . . the “Pre-wash”, “Main indicator lamp starts flashing wash”...
- Page 27 . . . Lime deposits appear on use in washing machines. A used. the drum surface? product called “Quick” is available from the Miele Parts Department. – Use the correct amount of detergent for the water hardness in your area.
- Page 28 All manuals and user guides at all-guides.com Problem solving guide Problem solving guide What to do if, . . . Cause . . . Remedy . . . – Add more detergent. Insufficient detergent was used . . . Grey greasy particles to break down the particles of cling to washed laundry? –...
- Page 29 All manuals and user guides at all-guides.com Problem solving guide Problem solving guide Place a dish or bowl under the spout. Opening the drum door in the event of a power failure Point the drain hose into the con- tainer. Switch off the washing machine.
- Page 30 All manuals and user guides at all-guides.com Problem solving guide Problem solving guide To check water pressure Place a bucket under the stopcock. Turn on the stopcock. If 5 litres of water flow into the bucket in 15 seconds the water pressure is cor- rect.
-
Page 31: After-Sales Service
If problems occur that cannot be easily remedied, or if the appliance is under warranty, please contact: – Your Miele Dealer or – The Miele Service Department (see back cover). When contacting the Service Depart- ment, please have the model and serial... -
Page 32: Installation Instructions
If the machine is installed on a raised platform, it should be secured using retaining clips (available from the Miele Parts Dept.). If installed on a masonary or concrete base, the base should be provided with a rim 1/2" to 3/4" (12-20 mm) high. - Page 33 All manuals and user guides at all-guides.com Installation Installation Turn the right-side shipping strut 90° clockwise. Plug the two holes with the plastic caps supplied. Movement of the machine without the shipping struts in place should be kept to a minimum. The shipping struts should be stored in a safe place for future use.
- Page 34 All manuals and user guides at all-guides.com Installation Installation Tighten the counternut using a Levelling the machine screwdriver, as shown. The machine must be perfectly level to ensure safe and proper operation. Building in This washing machine is specially de- signed for installation under a counter- top, and comes with a protective cover which replaces the machine lid.
- Page 35 – Spacer frames (with installation in- ding additional adapter strips and ex- structions) can be purchased from tension bolts. These parts are available your Miele dealer or the Miele Parts from your Miele dealer or the Miele Department. Parts Department.
- Page 36 All manuals and user guides at all-guides.com Installation Installation Installing the front panel A front panel must be installed on the washer before it can be safely oper- ated. It can be custom made to match the surrounding cabinetry or furmiture. Front Panel Dimensions: Height: "...
- Page 37 All manuals and user guides at all-guides.com Installation Installation Open the door and remove the lower screw from the upper hinge. Using the screws provided, loosely attach the front panel th the machine door through the now empty lower hinge hole and the corresponding hole on the unhinged side of the door (see illustration).
- Page 38 Washer-Dryer stack rquired This Miele washing machine can be in- " (820 mm) none " (100 mm) stalled as a washer/dryer stack " (870 mm) " (150 mm) together with a Miele tumble dryer. For "...
- Page 39 All manuals and user guides at all-guides.com Installation Installation Any residual water left in the Water hardness reminder machine from the factory test- The amount of detergent needed to ing process can be flushed wash clothes depends on various fac- tors, including the water hardness in out as follows: your area.
-
Page 40: Plumbing
All manuals and user guides at all-guides.com Plumbing Plumbing Connect the cold water supply hose Connection to the drain sys- (hose marked blue) to the cold water valve and the hot water supply hose The 5 ft. (1.5 m) drain hose may be con- (hose marked red) to the hot water nected as follows: valve. -
Page 41: Electrical Connection
The proper outlet can be purchased cordance with all local codes and ordin- from any electrical supply dealer or ances. from the Miele Parts Dept. Ask for a NEMA 14-20 R receptacle. Warning “EASY INSTALLATION KIT” Improper connection of the equip- If you don’t have a designated, 4 wire,... - Page 42 5th ing pages. rinse cycle, if required. There are other programmable func- tions which are reserved for Miele Service Engineers. They are not nor- No water intake through mally activated, and require access compartment i to internal machine components.
-
Page 43: Programmable Functions
All manuals and user guides at all-guides.com Programmable functions Programmable functions Step 1: Turn off the machine, close the door, and release all pushbuttons. Set the progam selector switch to “Finish/Start”. Step 2: Carry out steps 2 and 3 within 4 seconds. Press the “ON/OFF”... - Page 44 All manuals and user guides at all-guides.com Programmable functions Programmable functions Step 4: Select the function desired: Set the Program selector to “Fine rinse”. Desired function: Continue with Step 5 to High water level activate. Set the Program selector to “Drain”. 5th rinse cycle Continue with Step 5 to activate.
- Page 45 All manuals and user guides at all-guides.com Programmable functions Programmable functions Set the Program selector to “WOOLENS 85°”. Additional rinse in Continue with Step 5 to Rapid wash activate. Step 5: activate the function Press the “Water plus” button twice (i.e. in and out once) to toggle the function “ON/OFF”.
- Page 46 All manuals and user guides at all-guides.com Programmable functions Programmable functions To check if the function has Deleting the additional func- been stored: tions: Carry out Steps 1 to 4. Follow the same instructions given under “To activate the additional func- If the “Rinse 1-2”...
- Page 47 All manuals and user guides at all-guides.com INSTALLATION INSTRUCTIONS Technical data INSTALLATION INSTRUCTIONS Technical data 1.1 Dimensions Height "+ "/– " (850 mm +10/–0,5 mm) Width " (600 mm) Depth (including distance from wall) 24" (610 mm) Weight 220 lbs. (99 kg) Capacity 11 lbs.
-
Page 48: Technical Data
All manuals and user guides at all-guides.com Technical data Technical data 1.2 Specifications Hot and cold water hoses come equipped with " Female hose thread connec- tions. Drainage is via a 5 ft. long (1.5 m), 1 " OD hose. This washing machine is supplied with a 5 feet long cable with plug for connection to a 120/240 V (208 V) 60 Hz (3-pole-4 wire grounding) power supply. - Page 49 All manuals and user guides at all-guides.com...
- Page 50 All manuals and user guides at all-guides.com...
- Page 51 All manuals and user guides at all-guides.com...
- Page 52 All manuals and user guides at all-guides.com Alteration rights reserved/000 3296 These instructions are printed on 100% recycled paper and are completely Biodegradable.