Table of Contents
Advertisement
9. Illustrated Parts List (IPL)
9.1 Introduction
9.1.1 Purpose
9.1.1.1 The IPL provides all the information required to order replacement or
9.1.2 Availability
9.1.2.1 Parts are available from the manufacturer of the Model 668-400-2.
9.1.3 How To Use the IPL
9.1.3.1 Refer to the illustration in the Detailed Parts List that pertains to the
9.2 Detail Parts List
9.2.1 The Detailed Parts List consists of illustrations and columnar parts breakdown
of the Model 668-400-2 Pressurematic Water System, its assemblies, and parts
that can be disassembled, repaired, replaced, and reassembled.
9.2.1.1 Figure 1 with its parts breakdown details the Model 668-400-2
9.2.1.2 Figure 2 with its parts breakdown details the pump assembly.
9.2.1.3 Figure 3 with its parts breakdown details the motor and drive housing
PO Box 8975, Vancouver, WA 98668-8975 • Phone: 360/253-2008 • Fax: 360/253-8294
2 Howard Road, Eaton Socon, St.
spare parts for the Model 668-400-2 Pressurematic Water System. All
procurable parts are fully described and illustrated.
Micropump, Inc., Vancouver, Washington.
assembly in which the part is used. Find the part in the illustration and
note the item number. then refer to the parts list that accompanies the
illustration for the part number, nomenclature, and quantity used per
assembly.
Pressurematic Water System.
assembly with pressure switch.
MICROPUMP, INC.
A Unit of IDEX Corporation
MICROPUMP
A Subsidiary of Micropump, Inc.
Neots, Cambridgeshire, PE 19 8ET England, • Phone: 011-44-1480-356600 • Fax: 011-44-
LIMITED
356300
Page 26 of 33
1480-
Advertisement
Table of Contents
