Idex MICROPUMP 668-400-2 Component Maintenance Manual With Illustrated Parts List page 10

Pressurematic water system
Table of Contents

Advertisement

2.1.1.10 One (1) each circuit breaker, Heinemann SM333-1-400-1 or equivalent.
2.1.1.11 One (1) each switch-light assembly, Micropump
2.1.1.12 One (1) each flat blade screwdriver, 3/16 inch (4.763 mm).
2.1.1.13 One (1) each hex key, 0.05 inch (1.27 mm).
2.1.1.14 One (1) each bushing insertion tool. (Refer to Special Tools.)
2.1.1.15 One (1) tap, 6-32
2.1.1.16 One (1) each hex key, 3/32 inch (2.381 mm).
2.1.1.17 One (1) each dial gauge calibrated to 0.001 inch (0.0254 mm).
2.1.1.18 One (1) each Micrometer, 1 inch (25.4 mm) graduated in 0.001 (0.0254
2.1.1.19 One (1) each depth gauge, graduated in 0.001 inch (0.0254 mm)
2.1.2 Materials required for testing and troubleshooting the Model 668-400-2 are as
follows:
2.1.2.1 Water, amount needed to fill item (2.1.1.5) in equipment list.
2.1.2.2 Four (4) to five (5) feet (121.92 to 151.7 cm) of 3/8 inch (9.525 mm) I.D.
PO Box 8975, Vancouver, WA 98668-8975 • Phone: 360/253-2008 • Fax: 360/253-8294
2 Howard Road, Eaton Socon, St.
mm) maximum.
maximum.
Tygon tubing or equivalent.
MICROPUMP, INC.
A Unit of IDEX Corporation
MICROPUMP
A Subsidiary of Micropump, Inc.
Neots, Cambridgeshire, PE 19 8ET England, • Phone: 011-44-1480-356600 • Fax: 011-44-
LIMITED
356300
Page 10 of 33
7835
or equivalent.
1480-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Micropump 8700

Table of Contents