The Master Pin - iDect V2i System User Manual

All manuals and user guides at all-guides.com
iDect_V2i_IFU_master.book Page 45 Thursday, March 27, 2008 2:54 PM

The master PIN

The Master PIN (personal identity number, or security
code) is required when handsets are registered and
deregistered, and when important changes to the settings
are made. (Note: The answering machine remote access
PIN is different to this master PIN.)
The default setting for the PIN is 0000. To protect your
handset's settings, we recommend that you change it to
a four-digit number you'll easily remember.
To change 1 Press the MENU/OK button
M
the PIN:
The display shows
!
2
d
Press the
! The display shows
3
M
Press the MENU/OK button then the
u
TWICE
! Display shows
4 Press the MENU/OK button
M
! Display shows
.
5
Key in the new PIN number and press the
MENU/OK button
M
! Display shows
6 .
Key in the PIN again and press the MENU/OK
button
M
You will hear a long confirmation beep and
!
the display briefly shows
7
Use the BACK button to exit the menu or press
B
HANG UP to go to standby mode
f
Help Line: 0845 345 9677
(Local Call rate)
Custom settings
Main Menu > Phonebook
D
button THREE times
Main Menu > Advanced Set
U
button
Advanced Set > Change PIN
Enter New PIN
Confirm PIN
New PIN Stored
45