Related Manuals for saro DI-1800
Summary of Contents for saro DI-1800
- Page 1 Model No. DI-1800 USER'S MANUAL MODEL NO.: DI-1800 BUILT-IN INDUCTION COOKING UNIT 27 December 2016 Pg. 1...
-
Page 2: How Does Your Induction Work
Model No. DI-1800 HOW DOES YOUR INDUCTION WORK? A high frequency (20-35KHz) induction coil underneath the ceramic top plate heats the cooking utensil by magnetic friction. The heat is produced directly within the pan and is controlled by an electronic circuit which offers superior performance and functions. - Page 3 Model No. DI-1800 USE AND CARE INSTRUCTIONS – IMPORTANT SAFEGUARDS DO NOT block the air-intake panel, as this may overheat the unit. We recommend pans to be in the range of 4.7~10.2 inches in diameter. Please refer to the next page for a list of suitable and unsuitable pans.
-
Page 4: Safety Devices
Model No. DI-1800 SAFETY DEVICES Automatic Safety Shut-Off, If the induction unit is left on for more than 60 seconds without a pan or with an incompatible pan, the unit will automatically shut off. Material Compatibility Detector If the pan’s material or it’s dimensions are not suitable for the induction unit, the power indicator light will not light. -
Page 5: Cause Of Overheating
Model No. DI-1800 OPERATING INSTRUCTIONS Ensure electrical supply matches the specifications of the data plate located on the base of the unit. Place pan on the centre of the ceramic top. Press power ON/OFF key, power indication lamp will be on. -
Page 6: Specifications
Model No. DI-1800 SPECIFICATIONS Model No. DI-1800 Induction Range Voltage 120V~60Hz Vitro-ceramic Plate 15 inches x 14.1 inches Electrical Power Consumption Max. 1800 watt Electrical Power Range Approx. 300 watt ~ 1800 watt Dimension 15 inches x 14.1 inches x 3 inches Cut Out Dimension 12.8 x 13.8 inches... -
Page 7: Troubleshooting
Model No. DI-1800 TROUBLE SHOOTING If your induction unit appears not to be working properly, it doesn't necessarily mean it's faulty. In all cases, check the following points. Malfunction Check….. No indication light when power "on" Cable/terminal block is loose Broken circuit of fuse;...