8. After the adjustment, reassemble the projector according to the section 6.13. "Replacement of LCD Panel (B)".
7.5.
Lighting Area Adjustment
7.5.1.
Tools to be used
Service Kit (Part No. TZSH07003): This kit is composed of 3 extension flexible cables and 2 connector extension cables.
Note:
· Consult your dealer or Authorized Service Center for the service kit.
7.5.2.
Preparation
1. Remove the upper case according to the section 6.2. "Removal of Upper Case".
2. Unscrew the 2 screws and remove the light shield metal.
3. Unscrew the 1 screw and remove the grounding metal 2.
4. Unscrew the 2 screws.
All manuals and user guides at all-guides.com
Repeat steps (1) to (3) until the green and blue crosshatch
patterns merge into a cyan pattern.
21
PT-P1SDU / PT-P1SDE / PT-P1SDEA