Mercedes-Benz EQC 350 4MATIC 2021 Owner's Manual page 115

112 Seats and stowing
Do not place any objects above the
#
lower edge of the side windows or on
the load compartment cover.
The load compartment cover is attached behind
the seat backrest of the rear bench seat.
To extend: pull load compartment cover
#
back by grab handle 2 and clip it into the
holders on the left and right.
To retract: unhook load compartment cover
#
1 from the holders on the left and right and
guide it forwards by grab handle
fully retracted.
Installing and removing the load compart‐
ment cover
Requirements:
The load compartment cover is retracted.
R
Removing the load compartment cover
Press in the end cap of the load compart‐
1
#
ment cover
Push the load compartment cover
#
the recess 2
Take the load compartment cover
#
2 until it is
pulling it upwards.
1 on the right- or left-hand side.
1 into
on the opposite side.
1 out by
Fitting the load compartment cover
Place the load compartment cover
#
recess 2 on the left- or right-hand side.
Press in the end cap of the load compart‐
#
ment cover 1 on the opposite side and
insert the load compartment cover
the other recess 2.
Slide the end cap outwards.
#
Attaching/removing the partitioning net
& WARNING Risk of injury or death due to
poorly secured objects
The partitioning net alone cannot secure or
restrain heavy objects, items of luggage or
heavy loads.
You could be hit by an unsecured load, par‐
ticularly in the event of abrupt changes in
direction, sudden braking or an accident.
Always stow objects in such a way that
#
they cannot be thrown around.
Secure objects, luggage or loads
#
against slipping or tipping over, e.g. by
1 in the
1 into