Selecting Incidents; Clearing Unwanted Incidents; Writing To Cd - Videoswitch VDM-9G160 User Manual

Videoswitch
ALT
and
8.4

Selecting Incidents

Up to ten incidents may be marked, and any number of these may be selected for copying onto CD.
When you have marked incidents for archiving onto CD, select which ones you wish to store onto CD:
Scroll through the list using the up and down cursor keys
Press the
YES
incidents are marked with a tick
CD. Those marked with a cross
If the size of the selected incidents exceeds the capacity of a CD, you will have to de-select (or delete)
incidents before you can archive them to CD. If necessary, you may need to use more than one CD to store
all the incidents that you require, selecting different ones before writing each CD.
Note that a single incident cannot exceed the capacity of a CD. Additionally, each incident must reside
completely on one hard drive. If the evidence you wish to archive crosses from one drive to another, you will
have to split it into two incidents.
8.5

Clearing unwanted incidents

If you wish to remove incident markers from the incident list prior to marking new ones:
INCIDENTS View the currently marked INCIDENTS.
You may scroll through the list using the up and down cursor keys
ALT
and
8.6

Writing to CD

Having marked one or more incidents, and selected at least one, writing to CD is started by pressing the
ZERO key (for firmware revisions prior to VDM001G4, use the Incident menu to start writing to CD).
Note that you can only write incidents to a blank CD. If you need to erase a CD-RW, enter "Incident
Options" in the "User Menu" select the "Erase CD" option and press YES. It is not possible to erase
a CD-R.
When important incidents have been written to a CD, always check that the CD plays back correctly, either
by playing it on the VDM or on a PC (see below).
Vdm601t.doc
Select a spare incident (or an existing incident if you wish to move the
marker)
Press the ALT and SET END keys. The time and date of the
end of the incident will added to the list
YES
key to select or de-select the incident. Selected
Press ALT and
does not delete any images, only the markers that are used for copying to CD.
and only these will be recorded onto
will not be recorded.
of you wish to delete the selected incident markers. This
VDM Digital Recorder
28